Jump to content
Muxe Inc Forums

AdminZ

Members
 View Profile  See their activity

  • Content count

    37

  • Joined

  • Last visited

Posts posted by AdminZ

  1. Posted · Report reply

    NDN 2.30.3866b:

     

    Don't accessible cdroms under EDR-DOS 7.01.08 WIP (17.12.06). From command.com and VC (Volkov Commander 4.05) cdrom accessible. EDR-DOS very nice DOS, possible best? - litle, fast, support FAT 32, more free low memory about 630KB in configuration below! Have Task Manager, best choice for boot fdd.

     

    Comment: From this configuration under DOS can get FULL access to FAT16/32, NTFS, ext2/3 with support LFN and national symbols on HDD, CD and USB!!! Under LZ-DOS (IMHO MS-DOS io.sys compressed) all work ok, but it don't have multitasking. Composition for FDD boot disk 1.68MB included LZ-DOS and EDR-DOS, have Win32 archivators support. NDN don't have support archivator UHARC by Uwe Herklotz (best compression from all archivators), but I patched ndn.prg from UFA to UHA and litle change archives setup ;)

     

    DConfig.sys (config.sys for EDR-DOS)

    ------------

    CLS

    TIMEOUT=10

    ECHO EDR-DOS Startup Menu

    ECHO ════════════════════

    ECHO 1. JEMM386

    ECHO 2. UMBPCI

    ECHO

    ECHO Enter a choice (1 or 2) [default after 10 seconds - 1]:

    SWITCH JEMM386,UMBPCI

    COUNTRY=7,866,A:\DRDOS\COUNTRY.SYS

    INSTALLLAST=A:\DOS\SHCDX33C.COM /D:QCDROM1 /~

    HIINSTALLLAST=A:\DOS\DOSLFN.COM -c+ -z=A:\dos\cp866uni.tbl

    SET OS=DRDOS

    SHELL=A:\DRDOS\COMMAND.COM /E:512 /P

    EXIT

     

    :SETUP

    DOS=HIGH,UMB

    DOSDATA=UMB

    DDSCS=HIGH,UMB

    XBDA=LOW,UMB

    HIFCBS=8

    HIFILES=40

    HIBUFFERS=15

    HISTACKS=9,512

    HILASTDRIVE=Z

    VERSION=7.10,7.10

    RETURN

     

    :JEMM386

    DEVICE=A:\DOS\QHIMEM.SYS /B /N32

    DEVICE=A:\DOS\JEMM386.EXE X=TEST I=TEST I=B000-B7FF

    GOSUB SETUP

    HIDEVICE=A:\DOS\QHIMEM.SYS

    HIDEVICE=A:\DOS\QCACHE.SYS

    HIDEVICE=A:\DOS\QCDROM.SYS /X

    RETURN

     

    :UMBPCI

    DEVICE=A:\DOS\UMBPCI.SYS

    DEVICE=A:\DOS\QHIMEM.SYS /N32

    GOSUB SETUP

    HIDEVICE=A:\DOS\QCACHE.SYS /L

    HIDEVICE=A:\DOS\QCDROM.SYS /L /X

    RETURN

     

    Autoexec.bat (common for LZ-DOS and EDR-DOS)

    ---------------

    @echo off

    a:\dos\xmsdsk.exe 65536 /y

    a:\dos\mb.exe rd=dos(check ld)

    md %rd%:\Temp

    set ramd=%rd%:\

    set tmp=%ramd%Temp

    set temp=%tmp%

    set vc=%ramd%vc

    set ndn=%ramd%ndn

    SET HDPMI=32

    SET DPMILDR=8

    SET TZ=CET+2

    if "%bcdw_cdrom%"=="" a:\dos\bcdw_pth.com

    if "%bcdw_cdrom%"=="" goto l1

    set bcd=%bcdw_cdrom%:\

    path %ramd%;%ramd%hx;%ramd%ifs;%ramd%usb;%ramd%ndn;%ramd%vc;%temp%;%bcd%dos\arc;%bcd%dos\util;a:\;a:\dos

    goto l2

    :l1

    path %ramd%;%ramd%hx;%ramd%ifs;%ramd%usb;%ramd%ndn;%ramd%vc;%temp%;a:\;a:\dos

    :l2

    if "%OS%"=="DRDOS" goto l3

    copy a:\command.com %ramd%>nul

    goto l4

    :l3

    copy a:\drdos\command.com %ramd%>nul

    :l4

    set comspec=%ramd%command.com

    copy a:\dos\uharcd.exe %ramd%>nul

    %ramd%

    uharcd.exe x a:\vdisk.uha

    copy a:\bt\*.bat %ramd%>nul

    call %ramd%m.bat

     

    m.bat

    -------

    @echo off

    cls

    echo.

    echo Select symbol and then press enter:

    echo.

    echo f) File System mount: NTFS, ext2/3.

    echo u) File System umount: NTFS, ext2/3.

    echo d) USB-HDD mount

    echo s) Mouse with wheel support

    echo n) Necromancer's DOS Navigator

    echo v) Volkov Commander

    echo k) Keyrus load

    echo r) Keyrus unload

    echo h) HXLdr32 & hdpmi32 load [Win32]

    echo x) HXLdr32 & hdpmi32 unload [DOS]

    echo t) Task Manager for DR-DOS

    echo m) This Menu

    echo.

    echo Dos Utilities: sys, bcdw, mb, dos, doslfn,

    echo keyrus, ctmouse, ctload, xmsdsk, uharcd.

  3. Posted · Report reply

    Hi!

     

    Please test this version and tell me if it works:

    http://ndn.muxe.com/archives/ndn_d32_wod.rar

     

    Btw, "NDN DPMI32 2.30.3829 w32" was not very helpful... :P

     

    Bye

    Stefan / AH

     

    Hi AngelsHolocaust,

     

    I test new version NDN 2.30.3866b - weekday show right, thank you. Remember what under DOS NDN crash if check option "Don't check windows". Section Advanced=855 in ndn.ini. I think what NDN in first order must oriented to DOS and Linux so as NDN best shell for this OS. Under XP FAR dominated so as have more plugins and more function. But so want say what NDN have powerful functions but FAR don't have their.

     

    Thank you for your work.

    Good luck.

  7. Posted · Report reply

    [en]

    I'm use both interface EN and RU result equivalented. Today Tu, 11-01-2007 run NDN and see Su 11-01-2007 :blink: this strange weekday in OS MS DOS 7.10 (Win98SE), under WinXP all o'key. My config.sys and autoexec.bat below.

     

    [ru]

    Ñåãîäíÿ äåíü íåäåëè ïîÿâèëñÿ, íî ïî÷åìó-òî ñòàë ñóááîòîé. Ñòðàííîå îòîáðàæåíèå äàòû ïðîÿâëÿåòñÿ òîëüêî â äîñå, ïîä Õà âñå ðàáîòàåò íîðìàëüíî. Èñïûòàíèÿ ïðîâîäèëèñü ñ ðàçëè÷íûìè ìåíåäæåðàìè ïàìÿòè, ðåçóëüòàò íåèçìåíåí.

     

    config.sys

    ------------

    rem device=c:\qemm\dosdata.sys

    rem DEVICE=C:\QEMM\QEMM386.SYS RAM ST:F VREGA ARAM=D000-D3FF

    rem device=c:\qemm\dos-up.sys @c:\qemm\dos7-up.dat

    DOS=HIGH,UMB

    FILES=40

    STACKS=9,256

    LASTDRIVE=Z

    device=c:\dos\himem.sys

    rem device=c:\dos\umbpci.sys

    rem device=c:\qemm\loadhi.sys /r:1 /size=960 c:\dos\lowdma.sys

    rem device=c:\dos\qxhimem.sys

    rem devicehigh=c:\dos\jemm386.exe

    DEVICE=C:\DOS\QCACHE.SYS /F /L

    DEVICE=C:\DOS\QCDROM.SYS /D:CDR000 /UF /L

    rem install=c:\dos\doslfn.com

    rem devicehigh=c:\dos\emm386.exe

    rem DEVICE=c:\dos\QEMM386.SYS xms:n ram rom db:0

    rem SET LH=c:\dos\LOADHI.COM

    rem SET DOSCP=866

    rem SET KEYBCODE=RU

    rem install=c:\dos\xmsdsk.exe 16384 /y

    rem device=c:\dos\srdxms.sys

    rem device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1)

    COUNTRY=007,866,C:\DOS\COUNTRY.SYS

    rem Country=007,866,C:\WINDOWS\COMMAND\country.sys

    shell=C:\command.com C:\ /P

    device=C:\WINDOWS\IFSHLP.SYS

     

    autoexec.bat

    ---------------

    set path=c:\wdosx;c:\hx;c:\dos;c:\dos\arc;c:\dos\util;c:\vc;c:\ndn;c:\windows\system

    SET TEMP=D:\TEMP

    SET TMP=D:\TEMP

    set HDPMI=32

    set DPMILDR=8

    set TZ=CET+2

    rem mode con codepage prepare=((866) C:\WINDOWS\COMMAND\ega3.cpi)

    rem mode con codepage select=866

    rem keyb ru,,C:\WINDOWS\COMMAND\keybrd3.sys

    c:\dos\shsucdx.com /d:CDR000

    rem c:\hx\hdpmi32.exe

    rem c:\hx\hxldr32.exe

    vc

  10. Posted · Report reply

    Today, wed, 10.01.2007 for first boot NDN show Tu 10-01-2007. I'm exit from NDN delete NDN.INI and again run NDN result - NDN again don't show week day %)

     

    I'm try change memory extenders: MS himem.sys 7.10 (Win98SE), umbpci.sys 3.70, qxhimem.sys 3.5, pure dos. Result don't change. Dos commamd DATE report wed, 10-01-2007. Under WinXP NDN show week day right: We 10-01-2007.

     

    My PC: MB chipset SIS 735, CPU Duron 1100.

     

    P.S. Excuse me my bad English, I'm speak Russian.

×